ioLogik W5340-HSDPA HSDPA Micro Controller with 4 AIs, 8 DIOs

ioLogik W5340-HSDPA HSDPA Micro Controller with 4 AIs, 8 DIOs, and 2 relay outputs

Highlights

• Universal tri-band UMTS/HSDPA 850/1900/2100 MHz with IPSec/
• VPN support
• Definable cellular connection strategy to optimize data transmission
• Intuitive menu driven front-end intelligence
• Flexible, Unicode alarm system supporting SMS, email, SNMP Trap, TCP, UDP
• One RS-232/422/485 serial port built in to connect with field serial devices
• Backup and sustainable data logging function
• Seamless SCADA connectivity by Active OPC technology
• Configure, update firmware, and program over the air via ioAdmin
• Windows/WinCE VB/ VC.NET and Linux C APIs
• -20 to 70°C operating temperature range (T model)

Includes

• 1 x ioLogik W5300
• 1 x 3-pin screw terminal block x 1 (for power input)
• 1 x 12-pin screw terminal block x 2 (for I/O)
• 1 x 5-pin screw terminal block x 1 (for RS-485)
• Document and Software CD
• Antenna

Specs:

Interface
GSM/GPRS/EDGE/UMTS/HSDPA

Band Options
Tri-band: UMTS/HSDPA 850/1900/2100 MHz
Quad-band: GSM/GPRS/EDGE 850/900/1800/1900 MHz

GPRS Multi-Slot Class
Class 10

GPRS Terminal Device Class
Class B 

SMS
Point-to-Point Text/PDU 

SIM Interface
3 V 

Ethernet
1 x 10/100 Mbps, RJ45 

Protection
1.5 KV magnetic isolation

Protocols
Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, SNTP

Channels
4 analog inputs with differential input

Resolution
16 bits 

I/O Mode
Voltage / Current

Input Range
0 to 10 V, ±10 V, ±5 V, 0 to 20 mA, 4 to 20 mA

Accuracy
• ±0.1% FSR @ 25°C
• ±0.3% FSR @ -10 and 55°C

Sampling Rate (all channels)
100 samples/sec

Input Impedence
200K ohms (min.)

Built-in Resistor for Current Input
102 ohms 

Channels
8

I/O Mode
•DI or Event Counter (up to 900 Hz)
•DO or Pulse Output (up to 100 Hz) 

Channels
Up to 8, source/sink selectable

Sensor Type
NPN/PNP type

I/O Mode
DI or Event Counter (up to 900 Hz)

Dry Contact
• Logic 0: short to GND
• Logic 1: open

Wet Contact

(For Source Type)
• Logic 0: 0 to 3 VDC
• Logic 1: 10 to 30 VDC

(For Sink Type)
• Logic 0: 10 to 30 VDC
• Logic 1: 0 to 3 VDC

Common Type
4 points per COM

Isolation
3K VDC or 2K Vrms

Counter/Frequency
900 Hz, power off storage

Digital Filtering Time Interval
Software selectable

Over-voltage Protection
36 VDC

Poweroff Counter Memory
Supports poweroff counter storage function 

Relay On/Off Time
10 ms, 5 ms (max.)

Initial Insulation Resistance
1G min. @ 500 VDC

Expected Life
100,000 times (Typical)

Initial Contact Resistance
30 milli-ohms (max.)

Pulse Output
20 operation times per minutes at rated load

Power Input
24 VDC nominal, 12 to 36 VDC

Overview:

The ioLogik W5340-HSDPA micro controller is a rugged, compact solution for remote monitoring and alarm systems. With the ioLogik W5340-HSDPA, you can define a cellular connection strategy, including Always-On and Wake-On-Demand, to optimize data transmission rates for different applications. In addition, the operational cost of cellular communication depends on the data transmission rate. With Moxa’s active technology, you can expect to cut transmission costs in half and offer different cellular connection strategies to achieve better data transmission fees.